Mechanical properties of continuous bamboo fiber-reinforced biobased polyamide 11 composites

This study is devoted to the analysis of the properties of continuous bamboo fiber (BF)-reinforced polyamide 11 (PA 11) composites. The SEM observations highlighted continuity between BFs and the polymeric matrix showing a high density of hydrogen bonds. The comparative calorimetric study of the matrix and its composites showed that the crystallinity of PA 11 was not modified by the presence of bamboo fibers. The physical aging observed in PA 11 is no more observed in composites due to physical interactions between PA 11 and BFs. The mechanical properties were investigated by tensile strength and dynamic mechanical analysis. The introduction of BFs enhanced Young's modulus of the matrix by a factor of 10. The presence of BFs also improved the storage shear modulus G′ over the whole temperature range. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47623.     

Ultrashort pulse-induced elastodynamics in polycrystalline materials. Part I: Model validation

The coupled thermal-mechanical response of a polycrystalline metallic film in response to ultrafast optical impingement is investigated. The thermo-elastodynamics formulated in the article considers laser absorption along the axial direction and thermal diffusion along the radial direction to account for the normal and shear stresses initiated by the rapid heating. The generalized formulation incorporates a two-step hyperbolic temperature model that characterizes the energy transport of electrons and lattices as finite in velocity. The coupling of thermal and mechanical fields is established through considering the energy dissipated in the form of propagating thermo-mechanical disturbances. The thermo-elastodynamical response of the polycrystalline film is found to be a strong function of the electron heat capacity that is also temperature-dependent. In addition, grain size effects due to film surface and grain-boundary scatterings are found to impact several thermophysical properties of the material. The impact of the energy transport of electrons is particularly prominent when the thickness becomes comparable with the electron mean-free-path. A staggered-grid finite difference scheme is followed to simultaneously resolve the coupled thermo-elastodynamical responses using an axisymmetric model. The time variation of the normalized electron temperature of a single crystalline gold film derived from the generalized model is favorably examined against published physical data, thus demonstrating the feasibility of the formulation in depicting the electron transport dynamics in response to non-ablating ultrafast irradiation.     

铁素体基Ti-Mo高强钢连续冷却相变及组织性能

摘要：为了深入了解铁素体基Ti-Mo高强钢在连续冷却相变过程中组织及硬度的变化及其原因，通过热膨胀法、金相及硬度等实验研究了Ti-Mo微合金钢在连续冷却条件下组织及性能的变化，探讨了冷却速率对组织、硬度及相变行为的影响机理，揭示了（Ti，Mo）C在奥氏体和铁素体中Ti/Mo原子比变化的原因。结果表明，随着冷却速率由0.06℃/s增加至17.9℃/s，组织依次为多边形铁素体+珠光体→多边形铁素体+粒状贝氏体→粒状贝氏体，硬度由144HV逐渐增大至228HV。当冷速由0.14℃/s增大至0.90℃/s时，组织中多边形铁素体比例不断增大，珠光体比例不断降低，硬度的提高主要来自于铁素体晶粒尺寸的细化及纳米级（Ti，Mo）C粒子的增多；当冷速由1.79℃/s增大至17.9℃/s时，组织中多边形铁素体比例不断降低，贝氏体比例不断提高，硬度的提高主要是由于贝氏体组织的细化及其比例的增加。（Ti，Mo）C粒子主要有2类：一类是奥氏体中析出的10～20nm的粒子，Ti原子数分数约为88%，另一类是铁素体中析出的小于10nm的粒子，Ti原子数分数约为68%，EDS测量结果与计算结果大致相当。     

松辽盆地伏龙泉断陷边界断层构造反转率

盆地边界断层通常为同沉积断层，同沉积断层活动时间相对短且具有间歇性，地层沉积时间相对较长，这决定了断陷盆地的地层分布格局。通过分析同沉积断层理论模式，认为断陷缓坡带地层厚度与边界断层下盘厚度相当，边界断层下盘通常缺失与上盘对应的地层，可选择断陷盆地缓坡带地层厚度代替边界断层下盘厚度，建立虚拟下盘厚度格架，然后运用位移-距离曲线等方法对边界断层开展定量研究。伏龙泉断陷位于松辽盆地东南部，为东断西超的半地堑盆地，发育4条边界断层，依次控制了4个沉积次洼，4条边界断层的活动强度和反转程度存在差异。伏龙泉断陷经历了断陷期、拗陷期、反转期三个主要的构造期次，分别对应于边界断层强烈活动、停止活动、反转活动3个演化阶段，发生于白垩纪末的反转活动使得边界断层再次活化，形成油气运移通道，深层油气向上运移到浅层圈闭中，形成次生油气藏。通过定量计算伏龙泉断陷各边界断层的反转率，结合油气富集规律认识，认为反转率适中的区域最有利于次生油气藏的形成和保存。     

吹氩流量对结晶器流场影响的插钉工业试验

 结晶器吹氩流量对流场分布有明显影响，因此明确吹氩流量对结晶器内流场分布的影响规律对提高铸坯质量有重要意义。通过插钉法工业试验研究了吹氩流量对结晶器内流场分布的影响，并且定量分析了液位波动的变化。结果表明，随着吹氩流量的增大，流场形态从双环流逐步转变为复杂流和单环流。结晶器内流场形态从双环流转变为复杂流和单环流的过程中，水口附近速度逐渐增大，液位逐渐升高，弯月面速度分布逐渐转变为从水口流向窄面，液位波动也相应增大。因此，生产过程中应选择合适的吹氩流量，避免产生复杂流和单环流，以提高铸坯质量。     

A superposition method of reflected wave for moving string vibration with nonclassical boundary

A reflected wave superposition method is proposed for an axially traveling string with classical and nonclassical boundaries, based on the reflection of the propagating wave on both sides of the string, combining its initial conditions and the continuity conditions in order to obtain the expressions for the reflected wave. The reflection process, in three phases, is deduced and a determinate expression for the transverse vibration is obtained. The correctness and superiority of the proposed method is verified by comparison with the Newmark-β method for an axially moving string with a fixed and a spring-dashpot boundary.